Some users have experienced their receiver restarting after pressing the channel button or playlist button. Please try the following fix:
1. Turn the receiver off.
2. Unscrew the Satellite dish cable attached to the "LNB1 In" connection.
3/ Restart the receiver.
4. Carry out a Factory reset. Go to Menu/System Installation/Factory Default. Password is 0000
5. Once the unit reset and comes to the initial menu, turn the receiver off.
6. Attach the Satellite dish cable to the "LNB1 In" connection.
7. Restart your receiver and retune the channels.
8. Please allow about 2 minutes for USB Initialising to complete. You should get a "USB Ready" message when the HDD is initialised.
9. Try watching TV and changing channels.
10. If this works, proceed to upgrading your receiver to the latest software version.
If this still doe snot work, please send your unit for repair via our retailer or direct to the following address:
DTV Solutions Limited
162 Main Road
Tawa
Wellington 5028
AH
