The following will allow you to reset your receiver to the factory default state. It will delete the channels and also any bookings. It will not delete already recorded items stored on the internal disk drive.
Performing a factory reset and re-tuning the channels. The procedure is as follows:
a) Press the Menu button
b) Navigate using the right or left button to the "Advanced" menu.
c) Select "Reset Factory Default"
d) Enter the password. Which is 0000
e) Select "Yes" and press OK to confirm Factory Reset
f) The receiver will clear the settings and show the initial setup menu.
g) Select the Language and press OK
h) Select your television type ( CRT, Plasma or LCD ) and press OK . If you have selected CRT, go to step h.
i) Select your primary output.
j) Follow the prompts to set the screen resolution.
h) Auto channel tuning will begin.
i) Once the tuning is completed you may re-book your recordings.
