Software on the DTVS-Smart1 can be loaded via a USB stick or via OTN (Over The Network).
1) USB Stick method
Please place the software in the root directory of the USB stick. Remove any other USB storage connections attached to the DTVS-Smart1 and then insert the USB the stick with new firmware into the DTVS-Smart1. Restart your DTVS-Smart1 and press the blue button on the remote control while the DTVS-Smart1 is restarting. A blue screen will appear and the software will be loaded. The DTVS-Smart1 will restart once software loading is complete.
2) OTN Method
When new software is available, the receiver will automatically detect the new software and will show the upgrade icon on the screen. Go to the Setup and the select Upgrade. Follow the onscreen prompts to carry out the upgrade.
