Please use the following instructions if you have lost the "PRIME" channel
1. Press the MENU button on the remote.
2. Select "System Installation" and press OK.
3. Select "Factory Default" and press OK.
4. Select "Yes" when "Do you want to reset information?" and press OK
5. Enter the password. The default password is 0000.
6. The Initial setup screen should appear.
7. Select your location and press OK.
8. Select "yes" when asked "Do you want to scan"
9. The receiver will start searching the following transponders:
a.12483
b.12456
c.12519
10. Once 12519 has been scanned, press the “Exit” button on the remote.
You should have all the channels.
