Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
DTVS-SMART1 / Using RS232 Port for comminications - Example
« Last post by admin on September 25, 2015, 07:32:30 am »
The DTVS-Smart1 has a RS232 port which can be used to communicate with external devices.
We have developed a sample application which shows how to use the RS232 port for communications.

The application can be downloaded
Please download via the following link:

https://www.dtvs.co.nz/download/dtvssmart1/example/rs232.zip
22
DTVS-SMART1 / Latest Firmware Version 1.5.7
« Last post by admin on September 22, 2015, 06:55:34 pm »
We are pleased to release the latest firmware version for the DTVS-Smart1.

Please download via the following link:

https://drive.google.com/file/d/1XVeQpJgQZ9pKU3SVoglsK7VR3C_Gmier/view?usp=sharing

Instructions:

1. Download the v157.zip file to you PC.
2. Extract the file "NTOBE-S_UPGRADE.BIN" to the root directory of a USB memory key
3. Insert the USB memory key to any of the USB ports on the DTVS-Smart1.
4. Press the Menu button
5. Select Setup and press OK
6. Select System and press OK
7. Select System Upgrade and press OK
8. Select "Firmware Upgrade" and press OK

Summary of changes:

v1.57

1) Changes to improve execution of some Android applications including Premier League Pass and Netflix
2) Some bug fixes

We suggest after loading this software, please change the Browser Style to "Android". The steps are:

Open the Web Browser, Select Settings, Select Advanced, Select Browser Style, Select Android


23
DTVS-SMART1 / Netflix - Laggy video
« Last post by admin on June 27, 2015, 10:49:44 am »

This is caused by either the speed of the internet (content delivery) or hardware acceleration not started. Restart the playback after a few seconds until hardware acceleration is enabled. Contact us if you still have problems.
24
DTVS-SMART1 / Netflix - Blank picture and No Audio
« Last post by admin on June 27, 2015, 10:44:39 am »

We are looking for a permanent fix for this this issue. Following should fix it:

1) Shut down your receiver
2) Start up the receiver and immediately press the RED button on the remote until the recovery menu shows
3) Select "Factory Reset"
4) Select "Erase cache data"
5) Select "Yes" to wipe cache
6) Select "Yes" to restart
 
25
DTVS-SMART1 / Premier League Pass
« Last post by admin on June 20, 2015, 01:54:18 pm »

Premier League Pass is know to work on the DTVS-Smart1. If you are having issues please contact us via email.
26
DTVS-SMART1 / Netflix
« Last post by admin on June 20, 2015, 01:53:31 pm »

Netflix NZ is known to work on the DTVS-Smart1. If you are having issues please contact us via email.
27
DTVS-SMART1 / Full software recovery
« Last post by admin on June 16, 2015, 01:18:33 pm »
The following instructions are prepared for those who wish to completely wipe their DTVS-SMART1 and reload all the software. This process can also be used to recover the DTVS-SMART1 from serious software failure to improper shutdown or rouge software corrupting the units memory. If your machine does not start up after a very long period, then it is possible that the units has corrupt software or memory. Carry out the following to recover your unit:

** NOTE: USE THIS PROCEDURE FOR SOFTWARE VERSION BELOW 1.5.6 **

1. Download software version 1.4.9 via the following link: https://drive.google.com/open?id=11ZvqQeaPsJKuxwzxBXbm6XKFA8sqedzH
2. Extract the file "NTOBE-S_UPGRADE.BIN" to the root directory of a USB memory key
3. Shut down the DTVS-SMART1 and then insert the USB key into the USB1 slot (at the back). Please ensure no other USB devices are attached.
4. Start the DTVS-SMART1 and then immediately press the RED button until the "Recovery Menu" appears.
5. Select Option 3 and then Option 3 again and the 1 (yes) to clear all partitions
6. The receiver will restart and begin loading software version 1.4.9
7. Software version 1.4.9 will allow your receiver to be recovered to a working state. You will then need to upgrade to the latest software version
8. Download the latest software version from the DTV Solutions forum
9. Extract the file "NTOBE-S_UPGRADE.BIN" to the root directory of a USB memory key replacing any other version
10. Shut down the DTVS-SMART1 and then insert the USB key into the USB1 slot (at the back). Please ensure no other USB devices are attached.
11. Start the DTVS-SMART1 and then immediately press the BLUE button until the "upgrade.." message appears.
12. Allow the upgrade to proceed
13. Once upgraded, press MENU and then go SYSTEM and select "Factory Reset"
14. Your receiver will now start up and will show the Initial Setup Menu. Carry out the installation as normal.
15. Load other Android applications needed via "DefaultApps" application


 
28
DTVS-SMART1 / Android Smartphone Remote Control Application
« Last post by admin on May 16, 2015, 09:11:12 am »
The Android version of the DTVS-Smart1 remote control application can be downloaded to your Android Smartphone via the Google Playstore. Search the Google Playstore for iSmartRCU by Innodigital Inc.

The iSmartRCU connects to the DTVS-Smart1 via the local network and has many features including transfer of application from your Android smartphone to DTVS-Smart1.
29
DTVS-SMART1 / YouTube not working - FIXED
« Last post by admin on May 15, 2015, 02:15:29 pm »

Google has made some changes to the API's which has made the supplied YouTube application redundant. A new application is now available and should automatically update the YouTube application to the new one.

If the YouTube application does not update, then you can install the latest version via the DefaultApps application. Follow these steps:

1) Press the GREEN button to enter the Applications Menu
2) Select DefaultApps
3) Wait until the list of applications appear. Note, sometimes it can take up to 5 mins for the screen to appear.
4) Select Download under YouTube

The application will be updated. You can then exit the DefaultApps application and execute the new YouTube Application.


30
DTVS-DSR1 / Latest firmware DTVS-DSR1 011B
« Last post by admin on May 06, 2015, 10:49:45 am »

The firmware can be downloaded from:

https://www.dtvs.co.nz/download/dtvsdsr1/firmware/011B.zip

Instructions on how to install the software are below:

1. Download and extract the contents to the root directory of a USB memory key. Extracted contents will be in the directory \DTVS-DSR1.
2. Turn the Power OFF to the unit.
3. Insert the USB memory key in the USB slot
4. Turn the power on to DTVS-DSR1 while repeatedly pressing the MENU button on the DTVS-DSR1 Remote control.
5. The USB Upgrade screen will appear and the software will begin updating
6. Once the upgrade is complete, the receiver will restart.
7. Your DTVS-DSR1 is now upgraded. Remove the USB memory key and begin using your DTVS-DSR1.


Pages: 1 2 [3] 4 5 ... 10